Alarmmate GSM Alarm System Instrukcja Użytkownika Pobierz pdf (Strona 21)

A Top Safety and Protection Solution Worldwide!

Page ２０ of 32 Ver 1.0

the siren will stop and you can listen in on the alarm area by phone.

Press the button “ ” on the remote control, or press Disarm button on the

Keyboard then input the password, the Control Unit disarms immediately.

The ICON will be off. Under this status, any sensor triggered, the control

unit will not alarm. Except if the sensor type is the 24-Hour Zones or

Watchdog zone or SOS zone.

Press the button “ ” on the remote control or Press the Arm button on the

keyboard then select Stay, the Control Unit enters Stay(Partial Armed)

status, the ICON will be on. In this status, the sensors had been set as

Stay Type triggered will alarm. The sensors which had been set as normal

Type triggered, will not alarm. Please see the menu of the Edit RF Zone.

Press Emergency button (SOS) “!” on the remote control or the control unit

or Press any Emergency button. The Control Unit will enter emergency

alarm. The siren will not sound, but will alert the pre-set phone number

immediately.

7.2 SMS Commands for Arm or Disarm or Inquiry system status or

switch on/off independent output relay.

The User can Arm/Disarm/Inquriysystem status/Switch on or off the

independent output relay by sending SMS to the Control unit. The SMS

Commands are below:

Notice:

The system will carry out the commands immediately (with no delay) after the

Control Unit receive this SMS command.

7.2.1 Armed

7.2.2 Disarm

Example

1234AA

When the Password is 1234

xxxxAA

“xxxx” stands for the password

(1-4 digits).

Return SMS

All Armed Mode activated.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Brak uwag

Alarmmate GSM Alarm System Instrukcja Użytkownika Strona 21