Alarmmate GSM Alarm System Instrukcja Użytkownika Pobierz pdf (Strona 31)

A Top Safety and Protection Solution Worldwide!

Page ３０ of 32 Ver 1.0

12. Maintenance

1) If the Control Unit works, but the remote control and other sensors fail,

please check and change the battery.

2) If the remote control works, but the Control Unit fails to send SMS texts,

switch the power of Control Unit off and switch it on after one minute.

Test this system after another minute, or check that the settings are

correct and the GSM signals are strong enough.

3) If the Control Unit can run and sensors work, but cannot send SMS texts,

please change the SIM Card to check it.

13. Warranty

1) This system is warranted to be free of defects in material and

workmanship for one year from the date of purchase.

2) This warranty does not extend to any defect, malfunction or failure

caused by abuse or misuse by the Operating Instructions.

15. Trouble Shooting Guide

PROBLEM

CAUSE

POSSIBLE SOLUTION

GSM Module

initialization

failed

1) Backup battery with low

voltage;GSM Module

connection loose in

transportation;

2) GSM Signal is too

weak

1) Please contact the AC Power;

2) Please take the panel to a mobile phone

repairmen store, ask the engineer to

check the GSM Module socket and the

GSM Module connection;

3) Please change another position to install

the alarm panel.

Automatically

Restart

1) Backup battery with

low voltage

1) When the backup battery voltage is lower

than 3.7V, the panel will alert by buzzer

sounds. Please contact the AC Power.

Wireless

Sensor

transmission

1) Wireless sensor with

low voltage

2) Wireless sensor used

1) Please replace the battery of the wireless

sensor, usually once /year;

2) Please correct the resistor value to 3.3M

1 2 ... 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Alarmmate GSM Alarm System Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji